Garmin Echo

Description

Guide for Garmin Echomap UHD2-52CV

1. Turning on the system:

1. Turn on the boat using the switch on the right at the back of the boat.
2. Start the Garmin boat module by pressing the left button. Hold it until AFTER the beep! Then wait at least 45 seconds.
3. Turn on the Garmin device in the same way. Hold the power button until after the beep.
4. After a moment, a warning will appear on the screen; press “select” to confirm.
5. After a while, you will hear a beep with the message “WIFI host is not responding to the client connection…” Press “select” to confirm.
6. Press the “Home” button.
7. Scroll down to go to SETTINGS and press “select.”
8. Navigate to “Communication” and press “select.”
9. Navigate to Wi-Fi Network and press “select.”
10. Turn off the Wi-Fi signal and press “select.”
11. Press “select” again; two options will appear: “Host” and “Client.”
12. Navigate to “Client” (not to “Host”) and press “select.”
13. After a few seconds, you will see the status change from “Not connected” to “Connected.”
14. Press the “Back” button four times.
15. Your system is now in use.

2. Turning off the system:

1. Note! Hold the left button at the back of the boat until the Garmin device automatically turns off. You will also hear a short beep.
2. Turn off the boat using the switch on the right at the back of the boat.

Follow these steps carefully for turning your system on and off to ensure proper functionality. If you have further questions, feel free to ask!